New PID control
On the Alex PID the mechanical pressure stat has been replaced with a visual digital electronic PID, electronic solid state relay for noiseless switching, giving improved reliability and accuracy.
Notes / Instructions from IZZO SRL coffee
The PID can be used to alter the temperature but we strongly advise that you keep to 124-126 degrees giving a boiler pressure of 1.25 - 1.4 bar. This will provide water at a good temperature for steam and making espresso. Increasing the temperature too high will result in the boiler pressure being too high and the machine running to hot.
If you should want to change the temperature
Press the left (Down) Button on the PID
Prg will be displayed
Quickly press the right button and the temperature will be displayed, then press the right or left button to raise the brew temperature to the desired level. Value is stored when no button is pressed.
Please note we explain the new PID in greater detail in our very own instruction guide provided with delivery of every Izzo coffee machine.
TECHNICAL SPECIFICATION
- Height - Width - Depth: Width - Depth: 370 x 450 x 425 mm
- Weight: 30 kg
- Construction Heavy gauge Stainless Steel
- Voltage & Power: 220 V-50Hz, (suitable for UK or Europe), 1500W
- Water Tank 3 litres, low water sensor
- Boiler Capacity: 2 litre
- Pump Pressure: 12-14 bar
- Group Head: 1 (Faema E61)
- Filter Handle(s for 1 or 2 cups, Internal Diameter 58 mm
- Cup Warmer Yes
DOWN LOAD THE PDF FOR THE NEW "CLOSER LOOK" ON THE MK 11 DUAL WATER
IZZO ALEX MK II - 1.06MB
Click the link above or the pdf icon to see a closer look at the coffee machine - Izzo Alex MK II.





