Lelit Bianca Dual Boiler - Paddle PL162T
Version 2 Upgraded Features:-
Instant Stand-By Sleep Mode By holding the plus and minus button simultaneously for three seconds on the LCC display, the machine will go into sleep mode. Please note the LCC must have sleep mode turned ‘on’ in the menu for 30, 60…up to 540 minutes. This is just a quick way to get the machine into standby mode where the coffee boiler is maintained at 80 degrees C and the steam boiler is turned off.
Reserve Mode for Water Reservoir
The machine can perform the espresso extraction while the water level is low in the reservoir. Also, if the water level in the reservoir is just above the low water indicator, the extraction will continue for 60 seconds after the LCC indicator shows low water. Thus, this will save the espresso shot!
Instant Economy Mode for Powering Coffee Boiler Only
By holding the minus button for three seconds, users can deactivate the steam boiler and maintain the programmed temperature of the coffee boiler.
Actual Boiler Temperature Display
Press the LCC plus button on the right side ONCE quickly and hold to see the current coffee boiler temperature. Press the LCC plus button TWICE and hold quickly to see the actual steam temperature.
Shot Clock Timer Display Delay
At the end of extraction, the shot clock time will continue to show on the LCC for 20 seconds.
The maximum steam boiler temperature increased from 125 degrees C to 135 degrees C (266 degrees F to 275 degrees F). The minimum steam boiler temperature on both V1 and V2 are consistently 115 degrees C (239 degrees F). No change is necessary for the safety valve on the steam boiler! In fact, the boiler and boiler safety valve for 3 bar allow increases on the version 1 espresso machines. Bellabarista are pleased to have been involved with the final detailing on the features and specification of this superb machine. It has been created for those want to become expert baristas and will enable them to get the best best out of every coffee. Dual stainless steel boilers, PID, paddle group head pressure control, external reservoir which can be positioned at either side or at the rear, this machines has it all!!!
We help you get the best from your Lelit Bianca with our comprehensive videos and user guide exclusive to Bella Barista customers.
Rotating it, you gradually vary the water flow inside the group until the highest pressure is reached. This way you can manually control every single phase of the coffee extraction to obtain the best possible result in the cup with every type of coffee blend.
It allows to control all the machine parameters, such as the temperature regulation for the coffee extraction and steam delivery, the pre-infusion times, the stand-by times, the possibility of enabling or disabling the steam boiler, the partial and total doses counter and the possibility of visualising the temperature in °C or °F.
Two separate boilers, one for steam and hot water delivery and one for the coffee extraction. A system studied to grant a higher temperature stability and to allow the simultaneous delivery of coffee and steam.
Bianca's water tank is seated in the stainless steel external "backpack" to avoid a possible heating up of the water temperature. It can be repositioned on each of the three sides of the machine to better adapt itself to the available space. It can be MEASURE THE REAR EXTRACTION PRESSURE
Thanks to the manometer on the E61 group you can measure the real pressure on the coffee puck having a much more precise and accurate control of the coffee extraction. STANDARD EQUIPMENT
Complete portafilter with 1 shot and 2 shots filters, bottomless portafilter with 18/20 g filter, blind filter, 70 L water softener, Lelit stainless steel tamper with aluminium handle, group cleaning brush, microfiber cloth, optional steam wand nozzle, accessories for direct water plumbing, espresso cup rack and coffee measuring spoon.
STAINLESS STEEL APPLIANCE BODY AND PARTS
The appliance body and the water tray are made in polished AISI 304 stainless steel, the king of all materials, to grant an unlimited lifetime, a superior aesthetic look and an easy cleaning.
The new Lelit wands are all cool touch, to avoid any burn and have a new geometry to facilitate cleaning, avoid the limestone formation and allow a more satisfying use experience.
Bianca's feet are made of the same wood of all the other machine details and are adjustable in height. This allows a great stability on any surface and, in case of direct plumbing, allows the machine inclination to facilitate the water drain.
Bianca is equipped with a sophisticated energy saving system that allows programming the stand-by time, after which the steam boiler is disabled. The coffee boiler maintains a temperature of 70° C and the efficiency of the warming cup surface is kept at 80%. The machine returns in the full energy modus in just 10 minutes, granting this way a significant energy saving.
800 ml stainless steel coffee boiler
1,5 l stainless steel steam boiler / E61 group with paddle to regulate the water flow on the coffee puck
Professional water-steam taps with spring closure / I/O back-lit stainless steel switch / Programmable pre-infusion parameters through LCC
LCD high resolution graphic display
58mm filterholder with wood handle and exclusive Coffee Slide
Possibility of direct water plumbing and direct drain
Possibility to disable the steam boiler only
Programmable Stand-by function
Partial and total doses counters
Possibility to place the water tank on the three sides of the machine
Mug friendly and espresso cup rack.
Water tank: 2,5 l
Rotative pump motor: 150W
Dimensions WxDxH: 29 x 48,5 x 40 cm
Coffee boiler heating element: 1400W (230V-240V 50Hz) – 1000W (120V 60 Hz)
Steam boiler heating element: 1400W (230V-240V 50Hz / 120V 60 Hz)
Voltage: 230/240V 50-60Hz
Weight: 26,5 kg
|Model||Bianca - 230-240V UK Spec|
|Brew Group||Hybrid E61 with paddle|
|Indicator Lights||On, off,|
|Size and Weight||400H 290W 485D|
|Noise at 50cm in DB||68|
|Internal Water tank Capacity||2.5L|
|Water Connection||Internal & mains|
|Boiler Volume (Steam,Brew)||Steam =1.6 Brew =.8|
|Boiler Construction||Stainless Steel|
|Insulated Steam/Brew Boiler||Yes|
|Pressure Gauges||Boiler, Pump, Group|
|Adjustable Brew Pressure||Yes|
|No Burn Steam Wand||Yes|
|No Burn Water Wand||Yes|
|Steam/Water Valve Type||Non compression|
|Temperature Control||PID (LCC)|
|Drip Tray capacity/Construction||1l|
|Drip Tray drain kit for plumbed operation||Supplied,|
|Body Construction||Stainless Steel|
|Colours Available||No or colours|
|Low Water Cut Off||Yes,|
|Low Water Indication||Displayed on LCC|
|Number Porta Filter Holders||1 Easyglide|
|Feet Height Adjustable||Yes|
|Time to froth 200ml of milk||29 seconds|
|Other Features||Paddle adjustment og pressure|
|Other Feature||Moveable & Removable Reservoir tank|
|Other Feature||Professional lever valve technology, alternatively rotary valves technology|
|Item Returns||This item can be returned|